Expert tips contains helpful troubleshooting tips, and (known good/bad) thermal images and video clips that are compiled from actual repairs from experienced technicians, and various independent sources.
When the Thermal Imager is connected by USB cable to a PC, the expert tips feature is disabled. If the expert tips icon is selected while the USB cable is connected to a PC, an error message is displayed. To resume using expert tips, disconnect the USB cable from the PC.
Using Expert Tips:
| 1. | Press the Menu  button. |
| 2. | Select the Expert Tips icon from the toolbar. |
| 3. | Use the Up / Down control buttons to select a system, then press the Y button to open the menu. |
Press the N button at anytime to go back to the last menu.
| 4. | Make a selection, then press the Y button to view it. |
| 5. | Results may include: |
| ● | Know Good and Bad examples |
| ● | Tips |
Tips and/or reference images may not be available for all components. Tips are intended as guidance only.
Expert tip examples are shown below.
